When planning cleaning in Büyükhasbahçe, Alanya, start with the floor: the amount of moisture suitable for ceramic may not suit laminate or wood-look flooring. Including the floor type, the kind of visible dirt, and water access in the job description makes the scope clearer for homes, workplaces, and shared areas. CGS Temizlik is based at Sütçüler Mahallesi 15 Temmuz Şehitler Cd No109/D, Kepez/Antalya. Service scope can be discussed according to the address and access conditions by calling 0537 445 0191.
Match moisture and equipment to the flooring
On ceramic, stone, and similar hard floors, dry dust and loose debris can be removed first, followed by mopping suited to the surface. Grout lines, corners, and skirting edges may need separate attention. With laminate, parquet, or moisture-sensitive finishes, however, an overly wet mop, standing water, or harsh scrubbing can create problems. For these surfaces, low-moisture microfiber work, suitable tools, and the need for prompt drying should be stated in advance.
Paint drops, mortar, silicone, or adhesive residue are not ordinary daily dirt. Scraping or using a solvent needs to be considered in relation to the surface. Surface sensitivity is especially relevant when discussing post-construction cleaning.
Set boundaries between shared and private areas
For work involving an apartment or site management, it helps to make a written list of the stairways, landings, entrance, lift lobby, and any other shared passages included. The area in front of an apartment door, the door itself, interior windows, or cleaning inside a private unit may not be part of the same job. Where wet mopping is planned in common areas, the way people will pass through should also be agreed with management so that the work sequence is clear.
This distinction prevents shared-area work from being confused with cleaning inside a flat. See apartment and site cleaning for the common-area scope. For an empty flat, water and electricity access should be mentioned if cabinet interiors, kitchen, bathroom, and floors are requested.
Separate renovation dust from everyday dirt
Routine cleaning focuses on regularly used kitchen, bathroom, living, and work surfaces. After renovation, fine dust can settle again in cabinet interiors, window tracks, skirting boards, and floor edges. Removing bulky waste and taking fine dust in stages are different tasks. Before work begins, explain whether there is paint, mortar, packaging waste, or any need to move items.
Describe the service that fits the task
- Home cleaning: Covers kitchens, bathrooms, and living areas with surface-appropriate methods; rooms included and special belongings are agreed beforehand. More detail is available on home cleaning.
- Office and workplace cleaning: Covers workspaces, shared-use points, and toilets. The limit of intervention around electronics and documents should be clear.
- Post-construction and empty-flat cleaning: Fine dust, residue, and access to empty rooms are assessed; for an empty flat, cabinet interiors, kitchen, bathroom, and floors can be specified.
- Apartment, site, and villa cleaning: Shared areas need a passage plan. In a villa, the sequence depends on floors, rooms, stairs, windows, and how the property is being used. Pool maintenance is not included.
- Upholstery and window cleaning: Upholstery requires checking the fabric label and ventilation conditions. Window work depends on accessible glass, frames, and surface conditions; risky exterior façades or high-level work need separate consideration.
Before-and-after checklist
- State the floor finish, sensitive surfaces, and locations where residue is visible.
- Share information about water, electricity, entry, lift, or stair access.
- List the boundary between shared areas and the flat or workplace interior.
- Set aside electronics, documents, valuables, and items that must not be moved.
- At the end, check floor edges, skirting boards, kitchen and bathroom surfaces, and the agreed areas together.
How should renovation dust on laminate flooring be handled?
Starting with dry, soft equipment and then considering a low-moisture method appropriate to the finish is a safer approach. Hard residue should not be scraped at random.
Is the area outside an apartment door included with site stair cleaning?
It depends on the boundary agreed with management and the occupant. Stairs and landings may be shared areas, while the doorway area or the flat interior can require a separate decision.