When cleaning is planned for an apartment entrance in Çamlıova Mahallesi, Kaş, door-front areas, stairs, landings and windows may appear to be one task. If the boundary between shared and private space is unclear, however, safe access during cleaning and the review of marks noticed afterwards can become difficult. CGS Temizlik is based at Sütçüler Mahallesi 15 Temmuz Şehitler Cd No109/D, Kepez/Antalya. Scope can be discussed according to the address and access conditions at 0537 445 0191.
Define shared and private areas in writing
When speaking with building or site management, it helps to list areas rather than simply saying “the entrance and stairs.” The inside face of the main door, entrance floor, area around mailboxes, stair treads, landings, handrails, lift lobby and shared windows can each be separate items. Areas immediately outside apartment doors, or doormats belonging to residents, may be treated separately according to management’s decision or the building’s agreement.
This distinction reduces uncertainty about why a surface was not included or why personal belongings were left untouched. See apartment and site cleaning for shared-area scope. Management can also confirm access details in advance, such as keys, entry codes, staff accompaniment and permitted working hours.
Stair cleaning and safe passage need to work together
Where wet cleaning is needed in an entrance or stairwell, the cleaning zone should be temporarily managed separately from pedestrian movement. Depending on the conditions, this may mean working through one floor or one flight at a time, informing residents which route remains usable, and placing a visible warning where slipping could be a concern. Management can also clarify whether an alternative route exists for children, older residents, delivery workers or short-term visitors.
The floor material, existing soil and the manufacturer’s care instructions should be considered before choosing a method that could leave a surface slippery. One approach should not automatically be treated as suitable for every stone, ceramic, laminate or coated floor. At the end, check residual moisture, any equipment left at the entrance and clear access to handrails.
Record marks seen after window cleaning carefully
Not every mark noticed after window cleaning is a cleaning residue. Water spotting, wiping marks, an existing scratch, a coating issue or transfer from a frame can require different assessment. Double glazing, filmed glass, coated surfaces and sensitive frames may need specialist evaluation to identify the cause and an appropriate response. Trying to determine which side of glass has a scratch with a finger or fingernail is not a reliable test.
Before work begins, it is useful to note conspicuous scratches, cracks, dull patches or peeling with a management representative. Afterward, glass, frames and sills can be reviewed separately. For accessible surfaces, see window cleaning; access to high or risky exterior façades needs separate consideration.
Match the service to the type of work
Home, vacant-flat and villa cleaning require an agreed scope for kitchens, bathrooms, rooms, floors, stairs and accessible windows. In offices and workplaces, limits around electronics and documents should be discussed. Post-construction cleaning separates bulky debris from fine dust and treats paint or mortar residue with surface sensitivity. Upholstery cleaning depends on fabric labels and ventilation; pool maintenance is not part of villa cleaning.
If moving preparation involves cupboard interiors, floors and water or electricity access, vacant flat cleaning may be a more suitable starting point.
Practical check list
- Agree with management on boundaries for shared areas, door-front spaces and personal items.
- Plan temporary passage through the entrance, stairs and landings.
- Record notable pre-existing conditions on windows, frames and floors.
- Confirm water, electricity, entry access and working hours.
- Review shared areas, windows and the access route together after the work.
Can the building entrance remain open while stairs are cleaned?
It depends on the layout and whether a safe route can be maintained. If wet areas and the active passage can be separated, management can agree on a suitable sequence.
Is a mark on glass caused by cleaning or by the surface itself?
Appearance alone does not establish the cause. Residue, scratching, coating issues and other conditions should be assessed with the surface type and manufacturer care information in mind.