When arranging cleaning for a home in Esentepe, Kepez, wiping the visible side of a window is different from including both sides, the tracks and the frames. The distinction becomes especially useful where there are large panes, more than one floor, or a vacant flat being prepared for handover. Describing each area separately helps make the requested scope clearer. CGS Temizlik is headquartered at Sütçüler Mahallesi 15 Temmuz Şehitler Cd No109/D, Kepez/Antalya; scope can be discussed according to the address and access conditions by calling 0537 4450191.
Match the service to the area being cleaned
Home cleaning may cover kitchens, bathrooms and living areas with methods suited to the surfaces involved. Vacant-flat cleaning can separately define cabinet interiors, floors, kitchens and bathrooms. Villa cleaning may be planned by floors, rooms, stairs and windows. In offices and workplaces, limits around electronics and documents matter. Post-construction work separates bulky debris from fine dust; apartment and site cleaning defines shared spaces and safe passage on wet floors. Upholstery cleaning requires consideration of the fabric label and ventilation conditions.
Specify both window sides, tracks and frames
For a window cleaning request, the inside pane, outside pane, opening sash, fixed panel, track and frame are not automatically the same task. A useful description might be: “the inside and accessible outside of two large fixed living-room windows, including lower tracks and PVC frames.” Screens, shutters, blinds, balcony railings and high exterior sections should be mentioned separately.
Removing dust and debris from tracks is different from changing the appearance of older marks on a frame. Where a window has scratches, persistent marks or a possible coating issue, the condition should be assessed rather than assigned a definite cause. Without the manufacturer’s care instructions, no particular product or method should be assumed suitable. Inaccessible or high-risk exterior sections need separate discussion.
Plan villa floors and large panes separately
For a villa, it is more practical to describe the property floor by floor than as one undivided area. A lived-in lower floor and an unused upper floor may differ in room count, furnishings and window access. List stairs, landings, balcony doors and large sliding panes separately. Villa cleaning does not include pool maintenance, and any outdoor surfaces to be discussed should also be identified in advance.
Key and access responsibility in a vacant flat
When arranging vacant-flat cleaning before a move, clarify who holds the key, how entry will be provided, whether water and electricity are available, and whether any rooms are locked. Before handover, list which cabinet interiors, areas below sinks, shower spaces, kitchen counters, floors and window sections are included. If a key is handed over, recording the chain of responsibility, number of keys and return method in writing is a practical precaution.
Practical check list
- Separate the inside pane, outside pane, tracks, frames and access conditions for each window.
- Identify large, fixed or upper-floor windows by number and location.
- For a villa, list floors, unused rooms and stairs separately.
- Confirm keys, water, electricity and access to closed areas in a vacant flat.
- Afterward, review any uncleaned window sections, remaining track debris and visible marks on frames together.
Are window tracks always included in window cleaning?
Tracks should be stated explicitly in the request. Their depth, the amount of buildup and the way the window can be accessed may affect the scope, so it helps to list tracks and frames separately from the glass surfaces.
What should be clarified when leaving a key for a vacant flat?
Confirm who receives and returns the key, how many keys there are, which areas they open, and the status of water and electricity. The areas to be checked after handover can be added to the same record.