In Altınova Sinan Mahallesi, Kepez, two spaces with the same floor area can require very different cleaning plans when one is empty and the other is furnished. An empty flat can provide open access to cupboards and floors, while a furnished home requires decisions about furniture placement, sensitive surfaces and rooms that remain in use. CGS Temizlik is based at Sütçüler Mahallesi 15 Temmuz Şehitler Cd No109/D, Kepez/Antalya. Scope can be discussed according to the address and access conditions on 0537 445 0191.
Describe empty and furnished spaces separately
For an empty flat before moving in, it helps to specify cupboard interiors, the kitchen, bathroom and floors separately. Water and electricity access can also affect what can be carried out. In a furnished space, clarify which items stay in place, whether their interiors are included, and whether any rooms will remain closed. If manufacturer care instructions for a kitchen worktop, bathroom fitting or floor are unknown, a method should not be assumed in advance. Marks that may be scratches, stains or coating issues also need professional assessment.
Reopen an active office area by area
Where practical, an operating office can be phased instead of closing every area at once: a workspace that can be cleared first, then shared areas, followed by toilets. A completed section may then return to use while work continues elsewhere. For office and workplace cleaning, the limits around electronics and documents should be identified beforehand. Connections, document organisation and paperwork handling are outside cleaning work. The direction of foot traffic and arrangements around wet floors also belong in the plan.
Order balcony, interior windows and floors to avoid re-soiling
If these tasks are planned for the same visit, a practical sequence may be to address dry dirt and build-up on the balcony first, then accessible interior glass and frames, and leave floors until last. Water or fine dirt from window and frame work can reach the floor, so completing floors early may create repeat work. Window cleaning is assessed according to accessible glass, frames and surface conditions; risky exterior façades or work at height are not presumed within this plan. Rather than assuming one cause or method for balcony finishes, window marks or floor residue, share the available surface information.
Match each service to the right scope
Home cleaning can cover kitchens, bathrooms and living areas; empty flat cleaning can be discussed around cupboards, bathrooms, kitchens and floors before moving. Post-construction work separates bulky waste from staged fine-dust removal. Apartment and site work considers stairs, landings, entrances and common areas; villa work considers floors, rooms, stairs and windows. Upholstery cleaning depends on the fabric label and ventilation, while window work depends on access; pool maintenance is not part of villa cleaning.
Practical checks before and after the work
- List the areas to be cleaned, rooms to stay closed, and whether furniture will remain in place.
- Share water, electricity, keys and access arrangements beforehand.
- Identify special surfaces, available manufacturer care information, and any existing damage or marks.
- For an office, agree on the order of areas in use and wet-floor passage routes.
- At the end, review the agreed areas together, such as cupboard interiors, windows, balcony and floors.
Why can floors be left until after interior windows?
Drips or fine dirt from glass and frame work can reach the floor. Leaving floors to the final stage can help avoid re-soiling a completed surface.
How should documents and electronics be handled in an active office?
Show which desk and device surroundings may be cleaned, which documents and equipment must not be touched, and the order in which areas will be used. Document organisation, destruction and electronic repair are not cleaning tasks.