When a home in Kalkan, Kaş is being prepared for a move, cleaning around cabinets that are still being assembled is not the same as completing a detailed clean after installation. Exposed fittings, packaging, floor protection and furniture that has not yet been placed all affect the order of work. A useful request describes not only the number of rooms, but also the stage of the property and the surfaces that can be reached.
How the cleaning services differ
Home, vacant-flat, villa, office and workplace cleaning may cover kitchens, bathrooms, living areas, floors and an agreed furniture scope. Post-construction work separates bulky waste from fine dust. Apartment and site cleaning focuses on stairs, landings, entrances and shared areas. Upholstery cleaning depends on the fabric label and ventilation, while window cleaning is planned for accessible glass and frames. Pool maintenance is not included in villa cleaning.
This guide is particularly useful when distinguishing vacant-flat cleaning, villa cleaning and window cleaning.
Putting moving, assembly and cleaning in order
In a newly handed-over or renovated space, clarify who will remove remaining bulky materials, packaging, protective cardboard and unused parts. Then identify rooms where installers will return to work. If cabinet, appliance or fixed-furniture assembly is ongoing, leaving final wiping and floor detailing in those areas until after assembly can avoid repeated soiling.
Before a move, a vacant property may allow clearer access to cabinet interiors, kitchens, bathrooms and floors. Once belongings arrive, agree which rooms will hold boxes, whether beds or large furniture will be moved, and which areas are off limits. Where paint, mortar or adhesive residue is visible, one method should not be selected before the surface type and manufacturer care information are known. Distinguishing residue from a coating issue or surface damage requires assessment.
Separate planning for multi-level villas and large windows
For a multi-level villa, room count alone is not enough. Floors, stairs, rooms that will be used or kept closed, balconies and accessible windows should be listed separately. Work may often be arranged from upper floors downwards and from less-used areas toward the exit route, but moving traffic can change that order. The effect of wet floors on access also needs to be considered beforehand.
With large windows, interior glass, accessible exterior glass, frames, tracks and insect screens should not be assumed to be one scope. High-level or risky exterior work is not planned. If glass shows scratching, dullness, staining or a coating concern, seek professional assessment rather than trying to identify the cause remotely or with a simple home test.
Protection boundaries in furnished homes
For a furnished home, decide in advance whether valuable, fragile or personal items will remain in place. If available, share manufacturer care instructions for sensitive timber, natural stone, polished finishes, special coatings, leather or fabrics with unclear labels. The boundary for electronics and documents should also be clear; cable organisation, electronic repair and document handling are not cleaning tasks.
For a stain on upholstery or textiles, note the fabric label, when the mark was noticed and any products already used. This can help assess whether a method is suitable, without assuming that the stain will fully come out.
Checklist for the discussion and the work day
- Share the address, entry conditions, water and electricity access, and usable areas.
- State the assembly completion time, moving date and rooms closed to cleaning.
- List floors, stairs, accessible windows and exterior glass as separate items.
- Identify items to protect, sensitive surfaces and any manufacturer care guidance.
- At the end, review the kitchen, bathroom, cabinet interiors, floors, stairs and agreed windows against the scope list.
CGS Temizlik is based at Sütçüler Mahallesi 15 Temmuz Şehitler Cd No109/D, Kepez/Antalya. For Kalkan, Kaş, the service scope can be discussed according to the address and access conditions at 0537 445 01 91.
Can cleaning take place before assembly is finished?
Areas that can be cleaned and details to be completed after assembly should be separated. Set the final cleaning time for cabinet surroundings, floors and fixed-furniture interiors according to the installation schedule.
Is a mark on large glass a scratch or a stain?
Whether a mark is in the glass itself, its coating or a surface deposit requires professional assessment. Simple at-home tests about which side of the glass is affected do not provide a reliable diagnosis, and care methods should follow surface information.