When cleaning time arrives at a workplace, desks rarely look the same: one is covered with unsigned paperwork, another holds an open laptop with cables still connected. If an empty flat is also on the schedule that week, there is no furniture at all, yet whether the water and electricity are switched on becomes the deciding factor. In Haspınar, a neighbourhood of Serik in Antalya, these two situations require different preparation. At CGS Temizlik the scope is discussed according to the address and access conditions; phone 0537 4450191, main office at Sütçüler Mahallesi 15 Temmuz Şehitler Cd No109/D Kepez/Antalya.
What the eight services cover
Home cleaning covers kitchen, bathroom and living areas; office and workplace cleaning covers work areas, shared spaces and toilets. After construction, coarse debris and fine cleaning are assessed separately. Empty flat cleaning is for the pre-move stage, while building and residential complex cleaning addresses stairs and entrances. Villa cleaning sets an order by floor and room; pool maintenance is not included. Upholstery washing starts with the fabric label, and glass cleaning covers reachable surfaces.
Boundaries around documents and electronics
In an operating workplace, the most debated question is how far a desktop should be cleaned. A workable limit is this: stacks of paperwork and open devices are not moved, and the area beneath them is not cleaned that day. Document sorting, filing, shredding and electronic repair are not cleaning services and are not carried out. Liquids are avoided around screens, keyboards and power strips.
A business that wants a better result can make two simple decisions beforehand: which desks will be fully cleared, and which devices will be switched off and unplugged. A cleared surface can be cleaned completely; an uncleared one only where it is exposed. When the client defines this distinction, the expected outcome becomes clear too.
Work order in an empty flat before moving in
Because there is no furniture, the sequence runs top to bottom: cupboard interiors and shelves first, then bathroom and kitchen, and the floor last. If the floor is done first, dust falling from cupboards lands on it again. With the water off, wet work cannot be planned; with no electricity, machine work is not possible. Both are therefore asked about before the appointment, along with who arranges keys and building access.
Moisture and equipment by floor covering
One flat may contain several coverings, and the same method does not suit them all. On laminate and wood-look surfaces, water pooling at the joints is undesirable, so a damp cloth and minimal water make sense. Ceramic and natural stone tolerate more water, though the product choice depends on the stone type. On carpet and textile surfaces, drying time and ventilation are planned from the start.
Calling a method suitable requires knowing the manufacturer's care instructions. If the covering's box, warranty document or handover file is still available, sharing it is the most reliable route. Marks on a surface are not judged quickly either: whether it is a scratch, a stain or a change in the coating itself is separated only by expert assessment on site.
Checklist before and after the work
- Before: are water and electricity on, and how will access be arranged?
- Before: which desks will be cleared and which devices switched off?
- Before: are the floor types and any care instructions identified?
- After: have cupboard interiors, bathroom and kitchen been reviewed together?
- After: has ventilation been provided so damp areas can dry?
Can paperwork on desks be moved aside?
No. Only the user collects documents; on an uncleared surface, the exposed parts are wiped.
What if the water is off in an empty flat?
Wet work cannot be planned. Dry dust removal is possible, and the remaining scope is discussed again once water is available.