After windows are cleaned, a change in the angle of daylight often reveals faint lines or a hazy patch. Sometimes this comes from a drying mark left during wiping; sometimes it is something that was already on the glass. If you are arranging cleaning for an address in Yukarıkocayatak mahallesi in Serik, talking about this difference before work starts makes both the expectation and the working method clearer.
Residue versus an existing condition on the surface
What you see after cleaning falls roughly into two groups. The first is leftover water, detergent or lint from wiping; its appearance usually changes once the surface is fully dry or when you shift the light direction. The second is a scratch, dulling, mineral build-up or coating behaviour that exists on the glass or frame independently of cleaning.
These two cannot be separated reliably by eye. Deciding whether something is a scratch, a coating mark or a deposit requires expert assessment, and tricks such as probing with a fingernail to find which side a scratch is on are unreliable and can affect the glass further. The sounder approach is to make the current condition visible before work begins. If you have already noticed a spot, point it out. Where glass is coated, filmed or specially treated and the manufacturer's care instructions are unknown, the methods tried on that surface are kept limited from the start.
Protection decisions in a furnished home
In a furnished home, decisions made at the start shape the final result. Wooden sills, curtains, items on radiators or plants at the window can get wet during work. So it is agreed in advance whether window ledges will be cleared, which items will be covered and which the resident will move.
Surfaces that may count as delicate include polished wood, matte-painted doors, natural stone counters, mirror edges and metal finishes. Product and cloth choice differs for these; a general method is not assumed suitable for a surface whose care instructions are unknown. On fabric sofas, no method is chosen before the label is examined, and full stain removal cannot be promised.
Services and their scope
CGS Temizlik's scopes in brief: home cleaning covers kitchen, bathroom and living areas; office and workplace cleaning covers work and shared areas. Post-construction cleaning separates coarse debris from fine cleaning. Empty flat cleaning covers cupboard interiors, bathroom, kitchen and floors. Apartment and estate cleaning addresses common areas, villa cleaning the order of floors and stairs. Sofa washing and glass cleaning are separate scopes.
Checkpoints before and after
- Show any existing scratches, dullness or edge damage on glass before work starts.
- State if glass is coated, filmed or special; share care instructions if you have them.
- Confirm whether window ledges and sills will be cleared.
- Mark polished wood, natural stone and matte surfaces.
- Check that sofa labels are still readable.
- Check water and power access, and access to doors and outer glass.
Walking through the area together at the end
Reviewing the space together once work ends is the most practical step. Look at the glass in daylight from two directions rather than one, and wait until it is fully dry, since a wet surface misleads. A residue mark can be wiped again the same day; something belonging to the glass itself will not change with cleaning and is discussed separately. The same walk-through shows whether items were returned to place and whether any surface is still wet. To discuss scope and access, call 0537 445 0191.
How should I judge a line left on the glass?
Wait for the surface to dry fully and look from two light directions, then show it to the team. If it is residue it is wiped again; if it belongs to the glass, cleaning is not expected to resolve it.
Should I move the furnishings myself?
It is safest to move breakable, electronic and personally valuable items yourself. For what remains, covering or leaving untouched is decided together before work begins.