There is a dark mark that has sat on the arm of the sofa for years; in the next room the paint is new and a fine film of dust still settles on the floor. When both situations exist in the same home, asking for a single "general clean" usually leaves someone disappointed. In Yumaklar, a neighbourhood of the Serik district of Antalya, the most useful thing you can do before agreeing on scope is to describe the job in these separate parts.
Which jobs overlap and which do not
Home cleaning covers the kitchen, bathroom and living areas; office and workplace cleaning covers work areas, shared spaces and toilets. Empty flat cleaning focuses on cupboard interiors, bathroom, kitchen and floors. Post-construction cleaning separates coarse waste removal from fine cleaning. Apartment and complex cleaning deals with stairs, landings and entrances; villa cleaning follows a work order across floors, rooms, stairs and glass. Upholstery washing and glass cleaning are surface-dependent jobs handled on their own terms.
Realistic expectations for an old upholstery stain
Whether an old mark will lift completely cannot be stated in advance. The result depends on what the substance was, how long it has been there, what product was applied before, and the fabric itself. A sugary drink mark and an oil-based mark do not behave alike; where an area has been exposed to heat or faded in sunlight, the colour may stay different even if the stain lifts. This is why the fabric label and the manufacturer's care instructions come first in any upholstery washing discussion. If the label is missing or unreadable, deciding on a suitable method requires an on-site assessment. Rather than guessing the cause from a distance, note how many marks there are, where they sit and what has already been applied to them; that information shapes the scope. Drying needs ventilation, so plan on the sofa being out of use for part of the day.
If the renovation is not finished, dust comes back
Where painting, plaster, silicone or flooring work is still ongoing, a fine layer of dust settling again after cleaning is normal. That is not a sign of poor work; the space is still producing dust. The sequence usually becomes clear like this: coarse waste and rubble out first, then dust removed in stages, fine cleaning last. If a tradesperson still has a day or two of work left, it often makes more sense to leave the fine clean until afterwards. Paint and mortar residue is assessed for surface sensitivity, since not every residue comes off every surface the same way. These distinctions belong to post-construction cleaning.
Checklist for the day of cleaning
- Are water and electricity on, and who switches the meter or breaker on if not?
- Who holds the key, door code or caretaker access, and can the door be opened at the agreed hour?
- Are there building restrictions on using the lift or stairs?
- Is the sofa label still attached, and has any product been applied to the stain before?
- Is the renovation fully finished, or is a tradesperson returning?
- Have fragile items, electronics and paperwork been moved aside? Document handling, paper disposal and electronics repair are not part of the service.
- Is it clear where waste and rubble go outside the building?
Empty flats and moving day
Once furniture is out, cupboard interiors, bathroom and kitchen surfaces and floors take priority. The usual sticking point is a flat whose utilities have been cut off, which narrows what can be done; see empty flat cleaning. To discuss scope, call 0537 4450191; address and access conditions are agreed in that conversation.
What if the stain does not come out?
Even with a suitable method, an old mark may not lift entirely. This possibility is discussed upfront, and no removal guarantee is given.
Is cleaning worthwhile while renovation continues?
An interim clean can make a space liveable, but fine cleaning done before dust production stops will not hold.