The glass looks clean at noon, but when the sun hits at an angle, thin lines appear. This is exactly the kind of uncertainty someone faces when arranging cleaning in Konuksever, part of Muratpaşa: is it a leftover streak, or something already present in the glass that has simply become visible? The sections below explain the distinctions you can make yourself, both when describing the job and when checking the result.
Streaks, or something in the surface itself?
What you see after cleaning usually falls into two groups. The first is wiping-related streaking: lines caused by drying speed, the condition of the cloth, or residue that was not fully removed, whose visibility changes with the light. The second belongs to the glass itself: scratches, long-standing mineral deposits, differences in coating, or spatter left from an installation period.
These two cannot always be separated by eye. Fingernail or fingertip "which side is it on" tests do not give reliable answers; telling scratches, residue and coating apart requires on-site expert assessment. The practical approach is to review the glass together in daylight before work starts and note the existing condition, so that afterwards there is no argument about where a mark came from. Glass cleaning is scoped around reachable panes and frames; risky façade work or work at height is outside it.
Finishing moving and installation before cleaning
Wrong sequencing is the most common cause of repeated work. Curtains, air conditioning, furniture assembly, cabinet fitting or drilling should be completed before cleaning; otherwise fine dust spreads again. Likewise, if furniture is being moved, working while cupboards and floors are empty is both more thorough and quicker. That is why empty flat cleaning and cleaning a furnished home are different jobs with separately agreed scopes.
If renovation or new construction is involved, settle the split between coarse waste removal and fine cleaning at the start. On surfaces with paint, mortar or silicone residue, the approach depends on what the surface is; this is assessed under post-construction cleaning.
In the bathroom, the surface comes before the product
Two bathroom surfaces that look alike may not tolerate the same product. Shower enclosure glass, natural stone counters, matt ceramic, acrylic tubs, painted or powder-coated fittings and grout all behave differently. An acidic solution can leave permanent dullness on some stones; abrasive pads can leave fine scratch marks on glossy surfaces.
So it helps to gather this before work: the counter and floor material, whether the enclosure or fittings are coated, and the manufacturer's care instructions if available. Without those instructions a method cannot be considered suitable in advance; work proceeds after testing a small, hidden area. With old deposits such as limescale, complete removal may not be possible.
The eight services, briefly
Home cleaning, office and workplace cleaning, post-construction cleaning, empty flat cleaning, apartment and residential complex cleaning, villa cleaning, upholstery washing and glass cleaning are offered. In offices, limits around electronics and documents are agreed; pool maintenance is not part of villa cleaning; upholstery work follows the fabric label, with no stain-removal guarantee. Document handling, document destruction and electronics repair are not provided.
Checklist for before and after
- Review glass and mirrors together in daylight and record existing scratches or marks.
- Finish installation, drilling and moving work before cleaning.
- Have the materials of bathroom and kitchen surfaces, and any care instructions, ready.
- State water and power availability and building access arrangements in advance.
- At handover, let wet floors dry and then inspect surfaces again.
To discuss scope according to your address and access conditions: CGS Temizlik, Sütçüler Mahallesi 15 Temmuz Şehitler Cd No109/D Kepez/Antalya, phone 0537 4450191.
I see lines on the glass after cleaning. What now?
Look again at a different time and angle; lines that disappear as the light changes are usually wiping-related. Marks that stay visible regardless of light should be assessed on site.
Will limescale on a shower enclosure come off completely?
Not always. Long-standing deposits may already have marked the surface, and if the glass is coated, the usable methods are limited.