Before arranging cleaning for an empty home in Yurtpınar Mahallesi, Aksu, Antalya, decide whether the main problem is everyday dirt or renovation residue. Grease and bathroom deposits need different preparation from fine construction dust. Then consider furniture deliveries: if cupboards, window surrounds and floor edges need attention while empty, arrange cleaning around those deliveries.
Choose the scope by residue, not vacancy
An empty property does not automatically define the job. Home cleaning addresses kitchens, bathrooms and living spaces, with surface-appropriate methods and agreed boundaries for belongings and special requirements. For a move-in focused on cupboard interiors, empty shelves and floors, discuss empty apartment cleaning and name the areas explicitly.
If renovation has taken place, describe bulky waste, fine dust and attached residue separately. Removing packaging differs from collecting dust above cupboards; paint spots should not be treated as routine wiping. When discussing post-construction cleaning, establish who removes waste and identify sensitive surfaces with paint or mortar deposits. Share material information rather than requesting aggressive scraping on an unknown finish.
Sequence the work before furniture arrives
If painting, drilling or installation is unfinished, explain what remains. Dust-producing work in a cleaned room may mean revisiting surfaces. A practical sequence follows, although materials and access may require adjustments:
- Arrange bulky waste removal and clear working access.
- Collect fine dust in stages, starting with upper surfaces rather than wetting and spreading it immediately.
- Address cupboard interiors, shelves, doors and accessible window surrounds.
- Clean kitchen and bathroom deposits using methods suited to each surface.
- Leave floors until last, managing foot traffic and deliveries while they dry.
Before filling cupboards, check that shelves are dry. Share care instructions for newly installed or specially coated surfaces before work begins. Confirm water and electricity availability rather than assuming an empty property has both.
Define windows as separate components
Specify inside glass, outside glass, frames and tracks individually. Wiping the inner pane does not describe removing renovation dust from a track. Report paint or mortar on glass separately so surface sensitivity and scratching risks can be considered.
For window cleaning, discuss safe access to each component. Do not automatically include the outside of a fixed pane. Identify inaccessible sections beforehand without assuming hazardous façade or work-at-height tasks are available. Tracks and frames accessible from indoors can be considered separately from an unreachable outside pane.
Separate additional spaces and check handover
For villa cleaning, floors, rooms, stairs, windows and occupancy affect the sequence; pool maintenance is not included. Apartment building and residential complex cleaning instead concerns stairs, landings, entrances and agreed shared areas, with passage arrangements for wet floors.
Office and workplace cleaning covers work areas, shared spaces and toilets, with explicit limits around electronics and documents. If sofas are moving with you, discuss upholstery cleaning separately: inspect fabric labels, choose an appropriate method and plan ventilation. Complete stain removal should not be assumed.
- Before work: Confirm utilities, key handover, cupboards to empty and unfinished renovation tasks.
- Scope check: Record both glass faces, tracks, frames and excluded areas separately.
- After work: Inspect cupboard interiors, track corners, remaining surface dust and floor moisture; discuss inaccessible sections.
Contact CGS Temizlik on 0537 445 0191 to discuss these details. Service scope is agreed according to the address and access conditions.
Can cleaning be planned before installation finishes?
Yes, but identify which rooms the remaining dusty work will affect. Discuss leaving final floor cleaning until those tasks are complete.
Does inaccessible outside glass exclude the tracks too?
Not necessarily. Outside access and the scope for tracks and frames reachable from indoors should be assessed separately.