Cleaning Service

Antalya Warehouse Cleaning

Floor, racking-aisle and dispatch-area cleaning for commercial warehouses, bonded warehouses and the stockroom sections of business premises. Scope and working hours are confirmed after a site visit or consultation.

  • Washing or mopping suited to concrete, epoxy and tiled floors
  • Dry sweeping first for dust built up between racking and along the base of walls
  • Scheduled around hours when forklift and vehicle traffic has stopped
  • Dispatch area, entrance, warehouse office, staff area and toilets included
  • Need for machine floor cleaning in large areas assessed at the site visit

When a warehouse handover, a stocktake or a long-postponed deep clean is approaching, the first question is usually the same: how do you clear the dust and dirt that has built up between the racking and across a large floor without harming the stock or disrupting operations? With our warehouse cleaning service in Antalya we plan the job for a period when forklift and vehicle traffic has stopped or the area has been cordoned off, using a method suited to the floor type and without touching your stock.

Antalya CGS Temizlik, based in Kepez, takes on the cleaning of commercial warehouses, bonded warehouses and the stockroom sections of business premises across Antalya. Scope, floor type and any working-hour restrictions are confirmed after a site visit or consultation; on this page you will find a clear outline of what is included, what is discussed separately and what determines the price.

Which warehouses and situations is it suited to?

The service focuses on storage areas with large floor spaces: logistics warehouses, bonded warehouses, wholesale depots, the storage sections of factories and workshops, and stock areas that shops keep in a separate building. A small stockroom inside a shop is dealt with together with the sales floor under shop and retail cleaning; the planning described here is geared towards large, racked spaces with dispatch traffic.

Warehouse cleaning is most often needed in the following situations:

  • Warehouse handover, end of a lease, before a move or after settling into a new warehouse
  • Getting the racking aisles and floor in order ahead of a season opening or a stocktake
  • Periodic warehouse dust removal repeated at set intervals
  • Clearing mud and sediment after flooding; in this case the flood clean-up approach is applied first, followed by a general clean

If the warehouse is newly built or has just been refurbished, the floor will carry fine builders' dust, mortar and paint residue; for such spaces our post-construction cleaning guide is a better starting point.

What is included in warehouse cleaning in Antalya, and what is discussed separately?

The standard scope is based on surfaces that can be reached safely from floor level. The list below lets you see in advance which items we will go through when discussing your quote.

  • Included: sweeping large floors and washing or mopping them according to the floor type; removing dust that has settled between the racking and along the base of the walls; cleaning the loading and dispatch area and the entrance; cleaning the office section, staff rest area and toilets inside the warehouse; surfaces and windows that can be reached safely from floor level.
  • Discussed separately: points requiring safe access at height, such as the tops of tall racking and the roof structure; the need for machine floor cleaning in large areas; agreeing with the business which products may be used in food warehouses; clearing mud and sediment after flooding.
  • Not included: cleaning up chemical and hazardous-substance spills; industrial waste disposal; production-line and machinery cleaning; pest control; technical maintenance of cold stores; moving stock, pallets and goods.

The office section inside the warehouse is covered as part of the general clean; for details such as keeping desks in order and protecting paperwork and electronic equipment, the approach on our office and workplace cleaning page applies in full.

Concrete, epoxy and tiled floors: why does the method change?

There is no single recipe for cleaning a warehouse floor. The floor type determines both the product to be used and how much water can be applied:

  • Bare concrete is porous; it holds dust, and too much water can spread sediment across the surface. On these floors the emphasis is on dry sweeping and controlled damp mopping.
  • Epoxy-coated floors have a more sealed surface; abrasive products that could dull the coating are avoided and cleaners suited to the surface are used.
  • Tiled and ceramic floors need separate attention to the dirt that collects in the grout lines; as the grout shapes the overall look of the floor, a product suited to the surface is chosen here too.

In warehouses with heavy dust, dry sweeping comes first; going straight to wet cleaning turns the dust into mud and prolongs the job. The need for machine floor cleaning on large open floors is assessed during the site visit; whether a machine is used depends on the size of the area, the condition of the floor and the manoeuvring room left by the racking layout. In narrow racking aisles, working by hand and with small equipment is often safer.

If there is an unidentified residue or chemical trace on the surface, that section is not cleaned; the business is expected to identify the substance and, if necessary, arrange specialist disposal. Different cleaning chemicals are never mixed under any circumstances.

What the business needs to prepare before the appointment

How efficiently a warehouse can be cleaned depends on how easily the team can reach the area. The following preparations before the appointment speed up the job and protect your stock:

  • Stopping forklift, pallet-truck and vehicle traffic during the cleaning slot, or separating the area to be cleaned from the working area
  • Removing pallets, boxes and loose materials from the floor; the team cleans only the sections that have been cleared or are accessible
  • Ensuring water and electricity are available and showing the team where the water point and sockets are
  • Sharing the business's rules on permitted products in advance if food or sensitive goods are stored
  • Having a responsible person on site, or at least contactable, during the clean
  • Pointing out in advance any sections containing chemicals, fuel or hazardous substances

How does warehouse cleaning proceed?

  1. Consultation and site visit: We discuss the floor area, floor type, racking layout, how full the warehouse is, working-hour restrictions and any history of flooding or refurbishment; a site visit is arranged where needed.
  2. Scope and date: The areas included, the points to be discussed separately and a suitable time slot are confirmed. For Antalya's outlying districts, the date and travel are planned at this stage.
  3. Taking over the area: The team walks through the area with your representative once traffic has stopped and stock has been cleared; inaccessible or hazardous sections are marked.
  4. Dry sweeping: Loose dust and debris on the floor, between the racking, along the base of the walls and in the dispatch area are swept up and collected.
  5. Wet cleaning suited to the floor: The floor is washed or mopped using the method chosen for concrete, epoxy or tiles; if machine cleaning has been planned, it is carried out at this stage.
  6. Office, staff area and toilets: The enclosed sections inside the warehouse are cleaned separately; windows and accessible surfaces are wiped down.
  7. Inspection and handover: The area is walked through with your representative and any points within scope that could not be completed are clearly explained.

What determines the price of warehouse cleaning

Quoting a fixed list price for warehouse cleaning would be misleading; two warehouses of the same size can involve very different workloads because of differences in flooring and how full they are. The quote is shaped by the following factors:

  • Floor area: The total size of the floor and enclosed sections to be cleaned
  • Floor type and level of soiling: The different methods required by porous concrete and epoxy floors; tyre marks, oil stains and the amount of ingrained dust
  • Racking layout and stock levels: Narrow aisles, full racking and pallets on the floor affect access and the time needed
  • Need for machine cleaning: If machine cleaning is planned for large open floors, the equipment and transport arrangements change
  • Cleaning frequency: A one-off handover clean and regular periodic maintenance are planned differently
  • Working-hour restrictions: Any requirement to work outside business hours or within narrow time slots set by the business
  • Location: Travel to outlying districts within Antalya is assessed separately during the consultation

Get a quote for warehouse cleaning

To prepare a quote, all we need is the district your warehouse is in, its approximate floor area, the floor type, the racking layout and stock levels, and a suitable date. You can call us on 0537 445 01 91, message us on WhatsApp with photos of the warehouse, or fill in the free quote form; we will confirm the scope together and put together the right plan for your warehouse.

Frequently Asked Questions

Do we need to clear the stock and pallets before the clean?
Moving stock and pallets is the responsibility of the business; the team cleans the area that has been cleared or is accessible. For the racking aisles and the base of the walls to be cleaned, it is enough for the walkways to be clear. Which sections need to be cleared is agreed together during the site visit.
Are the tops of tall racking and the roof structure included in the clean?
These areas are not included by default; the service covers surfaces and windows that can be reached safely from floor level. Where safe access can be set up, high-level sections are assessed separately during the site visit. Where safe access cannot be provided, the work is not undertaken.
Can the warehouse be cleaned while it is operating?
Cleaning is scheduled for periods when forklift and vehicle traffic has stopped or the relevant area has been cordoned off. This is necessary for the safety of both the team and your staff. A suitable time is agreed during the consultation to fit around your shifts and dispatch hours.
Do you work in food warehouses or in areas with chemical spills?
The products used in food warehouses are agreed together with the business. Chemical and hazardous-substance spills, industrial waste disposal, production-line and machinery cleaning, pest control and the technical maintenance of cold stores are outside our scope. For these needs you will need to contact specialist firms.
What information should I provide for a quote or appointment?
The district and neighbourhood, the approximate floor area of the warehouse, the floor type, the racking layout and stock levels, any working-hour restrictions and a suitable date are enough for a quote. In large areas, the need for machine cleaning and the level of soiling are confirmed at the site visit. You can send the details by phone on 0537 445 01 91 or via WhatsApp.
Cleaning Guides

Related Guides

Explore guides on preparing for home and office cleaning, surface-specific care, accessible windows and post-construction cleaning.

  • Free quote
  • By appointment and prior arrangement
  • Antalya

Call About Warehouse Cleaning

If you are looking for a cleaning company in Antalya, tell us by phone or WhatsApp which areas need cleaning and which surfaces need care; we will discuss scope, access and appointment options.