Before moving into an empty flat in Yalnız, Finike, should cupboards, bathrooms and kitchens, or floors be cleaned first? A useful move-in plan is not only about making rooms look clean. It also helps make storage usable, leaves plumbing areas visible for checking, and avoids redoing floors after movers have passed through. CGS Temizlik is based at Sütçüler Mahallesi 15 Temmuz Şehitler Cd. No:109/D, Kepez/Antalya. The scope for an address in Yalnız is discussed according to access and site conditions. Phone: 0537 445 01 91.
A practical order for an empty flat before moving in
Start by confirming that the flat is vacant and that water and electricity are available. Plan cupboards, drawers and fixed storage first, because these areas become harder to reach once belongings arrive. In the kitchen, define cupboard interiors, the counter area and spaces where appliances will stand. In the bathroom, list cabinets, the shower area, basin and toilet surroundings separately.
The next stage can cover doors, frames, areas around sockets and accessible windows. Floors are usually left until last, reducing the chance that dust from higher surfaces or moving preparations will settle on a newly cleaned floor. Paint, mortar or adhesive residue needs care: a method should not be chosen without knowing the surface material and the manufacturer’s maintenance instructions. Distinguishing staining, scratching and coating issues may require professional assessment.
Why square metres do not define the whole workload
Two homes of the same size can require very different work. The number of rooms and bathrooms, whether cupboard interiors are included, the accessibility of windows, the previous use of the property, and water and electricity access all affect the scope. When describing the job, a list of requested areas is more useful than square metres alone.
For example, an empty flat cleaning request may include both cupboard interiors and floors, while a balcony, storage room, appliance interior or difficult-to-reach window should be stated separately. Where building or renovation dust is present, removing bulky debris is different from staged fine-dust cleaning. That distinction matters when discussing post-construction cleaning.
Planning cleaning in a multi-storey home
In a home with more than one floor, completing each floor as a working zone can be more orderly than repeatedly moving up and down. Upper-floor rooms, bathrooms and the start of the staircase may be addressed before lower living areas and the entrance. Stairs are commonly considered after the rooms, working from top to bottom. If a route has a wet floor, agree on a time when household members or movers will not need to pass through it.
For villa cleaning, share the number of floors and rooms, the stairs, windows and current use of the home. Pool maintenance is not included. Accessible windows may be considered under window cleaning; exterior work involving height or risk depends on the conditions.
Matching each service to a clear boundary
Home cleaning covers kitchens, bathrooms and living areas. Office and workplace cleaning covers workspaces and shared areas, with clear limits around electronics and documents. Apartment and site cleaning concerns stairs, landings, entrances and shared spaces. Upholstery cleaning requires attention to fabric labels and ventilation. Villa cleaning follows the home’s layout, window cleaning concerns accessible surfaces, and post-construction work separates debris from detailed cleaning.
Practical checks before and after the visit
- Before: Share key access, water, electricity, parking or entry details, and any areas excluded from cleaning.
- Scope: Name cupboard interiors, appliance surroundings, windows, balconies, stairs and storage areas individually.
- Surfaces: Keep manufacturer guidance available for delicate stone, wood, coatings or special finishes.
- After: Before belongings are installed, review cupboard interiors, bathroom fixture areas, kitchen work zones and floor routes together.
How can I reduce floor marks on moving day?
Identify the entrance and route that movers will use in advance. If possible, schedule final floor cleaning after large items have been moved; otherwise, keep those routes as separate items for a final check.
Will a mark on glass come out with cleaning?
It is not possible to confirm from appearance alone whether a mark is dirt, residue, a scratch or a coating issue. The glass surface and manufacturer care information should be assessed before selecting an approach.