When arranging window cleaning at an address in Kır, Konyaaltı, the request “clean the windows” may leave important details open. Interior glass, exterior glass, frames and tracks should be identified separately. This is especially useful where there are large panes, balcony doors or more than one floor. The work order also matters so that later floor cleaning does not undo completed window work.
Matching the service to the actual task
Home cleaning may cover kitchens, bathrooms and living areas. Empty-apartment cleaning can include cupboard interiors, bathrooms, kitchens and floors before a move. Office and workplace cleaning requires an agreed boundary around electronics and documents. Post-construction work distinguishes bulky waste from fine dust. Apartment and site cleaning focuses on shared areas, while upholstery washing considers the fabric label and ventilation. Villa cleaning can be organised around floors, stairs and windows; pool maintenance is not included.
For window-led requests, see window cleaning. For work order in a multi-floor home, see villa cleaning; for moving preparation, see empty apartment cleaning.
How to describe both sides, frames and tracks
List the interior and exterior side for each group of windows. A fixed living-room pane, an opening window, a sliding balcony door and stairwell glazing may not have the same access or cleaning conditions. State clearly which windows need cleaning on both sides.
- Glass surface: The interior and exterior sides are separate scope items.
- Frame: The profile around the glass, visible seal edges and joints can be discussed as separate work.
- Track: For sliding doors or windows, specify whether the request covers the inside of the track or only its visible section.
- Film or coating: Where a coating, protective film or sensitive surface is unknown, method selection depends on manufacturer care instructions and professional assessment.
The cause of a scratch, dull area, water mark or adhered residue cannot be confirmed from a description alone. The difference between a scratch and a coating issue, in particular, needs assessment. Abrasive scraping, strong chemicals or trial treatments should not be assumed to be part of the request.
Villa floors and large panes
A villa does not necessarily need the same approach on every floor. A regularly used lower floor, a less-used upper floor, the stair area and wide glass sections can be listed as separate areas. For large fixed panes, discuss access points; for opening sections, discuss whether both sides can be reached. High or risky exterior work cannot be included without considering access conditions.
A short floor-by-floor note is useful: which rooms need both sides cleaned, which balcony doors need track cleaning, and which areas need interior glass only? This separates daily-use spaces from rooms that are not currently in use.
Ordering balcony, interior-glass and floor work
Depending on conditions, a practical sequence may be to remove loose dry dust first, address frames and tracks, clean the glass surfaces, and finish the floors last. If debris from a balcony floor or track could be carried indoors, the route through the home should also be agreed. Completing interior glass before the final floor pass can help avoid later drips or footprints.
Practical checks before and after the work
- For every window, balcony door and large pane, note the interior side, exterior side, frame and track selections.
- Identify non-opening windows, limited-access points and any surfaces you believe may be sensitive.
- Discuss how nearby furniture, curtains, electronics and plants will be protected.
- At the end, review glass from different angles, along with tracks, frame edges and floor transitions.
CGS Temizlik is based at Sütçüler Mahallesi 15 Temmuz Şehitler Cd No109/D, Kepez/Antalya. Scope can be discussed according to the address and access conditions at 0537 445 0191.
Are tracks automatically included with window cleaning?
No. Cleaning the visible part of a track and removing material from within the track may be separate scope items. It is clearer to state the expectation for sliding doors and windows.
Can a scratch or mark on large glass be removed by cleaning?
No definite outcome can be stated. The source of the mark, the glass surface and any coating need professional assessment, and the method should follow available manufacturer care guidance.