When a flat in Kemer / Merkez Mahallesi is being prepared for moving in, or an office must remain in use, the timing of window cleaning can affect the whole plan. Windows and frames need to be considered together with access, surface condition, nearby belongings and the intended use of each area. CGS Temizlik is based at Sütçüler Mahallesi, 15 Temmuz Şehitler Cd. No:109/D, Kepez/Antalya; the scope can be discussed according to the address and access conditions at 0537 445 01 91.
Home, office and workplace, post-construction, empty-flat, apartment/site, villa, upholstery and window cleaning each require different preparation. In homes and villas, rooms, floors, belongings and stairs matter; shared access matters in apartment buildings; upholstery requires checking the fabric label; and post-construction work distinguishes debris from fine dust. See the detailed pages for home cleaning, post-construction cleaning and window cleaning.
Defining access limits for windows and frames
A window list should cover more than the number of panes. State how each side can be reached: an inward-opening sash, a section reachable from a balcony or terrace, a fixed panel, an exterior face and an elevated position are different situations. It is also useful to specify whether frames, tracks, insect screens and sills are included. Sections that do not open or require controlled exterior access need separate assessment; a risky exterior facade or work at height is not automatically included.
Marks, dullness, scratches or a possible coating issue are not the same as a cleaning decision. Their cause and the condition of the surface may require professional assessment. Without the manufacturer's care instructions, a particular chemical or abrasive method should not be treated as suitable. A customer can describe the visible area with photographs and identify whether it is on the inside or outside face, without trying to diagnose it.
Work order in an empty flat before moving in
For an empty flat before move-in, cabinet interiors, kitchen, bathroom, floors and windows can be discussed as separate items. If there is paint, mortar or substantial construction dust, it should not be confused with ordinary use-related dirt; the effect of residue on the surface is assessed before work. Water and electricity access, key handover and which rooms are empty also affect planning.
A practical sequence often starts with removing dust from higher surfaces, then cabinets and fixed areas, followed by windows and frames, with floors handled at the end. If further renovation, installation or moving will take place after the windows are cleaned, the final window pass may be better scheduled later. Sharing dates for boxes, curtain installation or furniture delivery helps separate areas that may become dusty again.
Releasing office areas back into use in stages
In an active office or workplace, the aim is not necessarily to close the entire operation while cleaning takes place. Where possible, work areas, shared spaces and toilets can be scheduled in separate time slots. A passage plan should be agreed in advance for areas where floors may be wet. The limits of work around documents, open files, computers and other electronics should be clear: cleaning does not include document organisation or electronic repair.
If inside window cleaning is planned, access should be left around desks by windows, cables, plants and personal items. A meeting room or reception area that must stay available can be excluded from that session or placed in a separate sequence.
Practical checks before and after the visit
- List inside glass, outside glass, frames, tracks and insect screens separately.
- Identify non-opening sashes, fixed panels and areas with limited access.
- Confirm water, electricity, keys and the moving timetable for an empty flat.
- Share office areas that will remain in use, passage routes and electronics boundaries.
- At the end, review visible window marks, frames and tracks, and floor passage areas together.
- Record suspected scratches, stains or coating issues separately rather than treating them as a cleaning result.
What if the outside face of a window cannot be reached?
Reachable faces and faces requiring additional access are identified separately. Suitable working conditions and scope for the exterior face can be discussed with the address details.
Do desks need to be cleared for office window cleaning?
It helps to arrange items and cables that block access near the window. Limits around documents and electronics should be agreed separately.