In Kemer / Yeni Mahallesi, one kitchen may involve two distinct cleaning tasks: cleaning the floor and cleaning inside the cabinets. If both are left under a vague “kitchen cleaning” request, the moisture level, equipment and work sequence may not be defined clearly. CGS Temizlik discusses scope according to the address and access conditions. The contact number is 0537 445 01 91.
Define the area and the surface separately
For home, vacant-flat and villa cleaning, specify kitchens, bathrooms, living spaces, floors, stairs and windows individually. Home cleaning requires clear boundaries around furnished areas, while vacant-flat cleaning can include cabinet interiors, bathrooms, kitchens and floors before moving. Pool maintenance is not included in villa cleaning.
For office and workplace cleaning, define workspaces, shared areas and toilets, as well as limits around electronics and documents. Apartment and site cleaning covers stairs, landings, entrances and other common areas, with a plan for passage over wet floors. After construction, removal of coarse waste is separate from detailed cleaning; dust is handled in stages, while paint or mortar residue requires consideration of surface sensitivity. Upholstery cleaning depends on the fabric label and ventilation conditions, and stain removal should not be assumed. Window cleaning is planned around accessible glass, frames and surface conditions.
Floor covering determines the moisture approach
When requesting cleaning, share the floor material, the visible condition of the covering and any manufacturer care guidance. Ceramic, stone-effect finishes, wood-look surfaces, laminate and other coverings should not automatically receive the same amount of water or the same equipment. Without manufacturer instructions, a method should not be treated as suitable.
Moisture control can matter especially near joints, edges, skirting boards and transitions. Removing dry soil and dust first, followed by controlled moisture appropriate to the surface, may be necessary. Swelling, dullness, sticky residue, scratches or colour change cannot be conclusively identified remotely as a stain, a coating issue or another cause; they need assessment. Report these conditions before requesting strong chemicals, abrasive pads or heavy wet cleaning.
List cabinet interiors separately from exterior surfaces
Wiping cabinet doors, handles, outer side panels and the area around the counter is not the same scope as cleaning shelves, drawers and food-storage interiors. If interior cleaning is needed, clarify whether cabinets will be emptied, who will remove remaining items and the condition of fixed contents. If only empty shelves are to be cleaned without handling contents, state that clearly.
Door material, coating, hinge areas and counter joints also affect moisture selection. Photos of existing staining, peeling, scratches or bubbling can help with planning, but they do not establish a definite cause.
Practical checklist for cleaning day
- Confirm that water and electricity can be used.
- Arrange entry, key handover, door code or access through a building contact in advance.
- List rooms to be cleaned, excluded areas and any request for cabinet interiors.
- Share manufacturer care information where available for floors, windows, upholstery or sensitive surfaces.
- Identify accessible window areas; risky exterior façades or work at height are not assumed.
- At the end, review floor edges, cabinet interiors, wet areas and the agreed rooms together.
When describing a request in Yeni Mahallesi, giving the area, surface and access details in the same message helps make the scope easier to discuss.
What should be stated if cabinet interiors are not empty?
Say whether shelves and drawers will be emptied, whether contents may be handled, and whether only exterior surfaces are required. This makes the kitchen scope clearer.
What information helps with a mark on the floor?
Share the covering type, any manufacturer care instructions, where the mark is located and how long it has been visible. Distinguishing a scratch, stain or coating issue may require professional assessment.