In Ünsal Mahallesi, Kepez, a renovation can look finished while fine dust remains around window edges, inside cabinets, or where floor surfaces meet. That is different from a home needing routine cleaning after normal use. Describing the request through the condition of the space, remaining work, and access helps establish a more useful cleaning scope.
Match the service to the condition of the space
Home cleaning can cover kitchens, bathrooms, and living areas, while vacant-apartment cleaning may be planned around cabinet interiors, floors, and the availability of water and electricity before a move. Office and workplace cleaning can include work areas, shared spaces, and toilets, with clear limits around electronics and documents. Apartment and site cleaning concerns stairs, landings, entrances, and safe passage on wet floors. Villa cleaning depends on floors, rooms, stairs, windows, and whether areas are in use; pool maintenance is not included.
Where renovation residue is present, post-construction cleaning separates bulky waste from fine cleaning and considers dust removal in stages. Accessible windows, frames, and surface conditions can also be discussed through window cleaning; risky exterior façades or work at height should not be assumed to be included.
Is the renovation actually complete?
Before detailed cleaning, check whether paint touch-ups, silicone, grout, electrical cover installation, furniture assembly, or any other dust-producing work remains. If work will continue, the timing of a final clean can be separated from a temporary dust-removal visit. Paint, mortar, or adhesive residue requires attention to the surface material and manufacturer care instructions; no method should be treated as suitable without that information. Distinguishing a scratch, stain, or coating issue may require professional assessment.
Dust reappearing after cleaning does not automatically mean the cleaning was incomplete. Ventilation, continuing installation work, uncovered textiles, or hard-to-reach voids can contribute. It helps to identify which rooms will be used, which cabinets are empty, and which areas will undergo further work.
Walk through the area together after cleaning
A room-by-room review at the end is more practical than trying to recall agreed areas later. The review can focus on whether the agreed scope has been completed, rather than attempting to diagnose every existing mark. If a window shows a mark, scratch, or possible coating issue, do not draw a firm conclusion from a simple test; the prior condition, material, and appropriate inspection method need consideration.
- Check agreed cabinet interiors, worktops, and accessible surfaces in kitchens and bathrooms.
- Look at floor corners, skirting-board edges, window ledges, and cabinet interiors for renovation dust.
- Separate areas that will remain closed from areas scheduled for further work.
- In offices, review the agreed limits around electronics, cables, and documents.
- Where shared areas have wet floors, confirm the intended passage arrangement.
Upholstery fabric and drying conditions
For upholstery cleaning, share the fabric label, current condition, approximate history of a stain, and manufacturer care information where available. Stains do not respond in the same way, and removal should not be assumed. Colour change, wear, coating concerns, or a permanent mark may need assessment before work is planned.
Drying after cleaning depends on ventilation, fabric construction, cushion thickness, and how the room will be used. Mention in advance if the seating will need to be used before it is fully dry. If renovation dust is still moving through the space, the timing of upholstery cleaning can be considered alongside the room's final dust check.
What should be checked if fine dust appears again after renovation cleaning?
Separate ongoing work, dust carried through open windows, residue in gaps, and areas that have not yet been used. Then clarify which part of the agreed scope needs to be reviewed again.
What information is useful before upholstery cleaning?
A fabric label or manufacturer care guidance, the approximate history of the stain, whether cushions can be removed, and ventilation conditions are useful. Service scope can be discussed with CGS Temizlik according to the address and access: Sütçüler Mahallesi 15 Temmuz Şehitler Cd. No:109/D, Kepez/Antalya; 0537 445 01 91.