Mopping a building entrance at nine in the morning is not the same job as mopping it at seven in the evening. The more people cross a wet landing, the shorter the result lasts and the higher the slip risk. When arranging cleaning for a flat, an office or a shared area in Hasdümen mahallesi, part of Serik in Antalya, the most useful preparation is simply noting who uses the space and at what hours. At CGS Temizlik the scope is discussed according to the address and access conditions; this guide is meant to make that conversation easier.
How usage density sets the order of work
Shared areas are usually sequenced in one of two ways. The first is top to bottom: starting from the highest floor and leaving the entrance and landings for last, so carried dust does not re-soil finished areas. The second is splitting by traffic: scheduling constantly used spots, such as the entrance hall, for a quieter hour. If a building has more than one door and one side can be closed while people pass through the other, wet-floor time becomes far easier to manage. Sharing these details early keeps an apartment and estate cleaning plan realistic. The same logic applies to a villa in use: stairs and corridors are handled after the room sequence is finished.
Flooring, moisture level and equipment choice
What is underfoot directly affects how much water is used. Ceramic and natural stone, laminate, wood, epoxy, or a carpeted landing do not take the same mop saturation. The general approach on coverings with seams and skirting is a well-wrung, barely damp mop and quick drying. If the covering's brand or the manufacturer's care instructions are known, please pass them on; without those instructions we cannot call a method suitable for that surface. Point out polished, slippery or visibly damaged sections in advance so tools and drying time can be adjusted. Telling a dull mark from a scratch or from worn coating requires an on-site assessment; it is not something to diagnose at a glance.
Keys, access and handover responsibility
For empty flats and pre-move work, keys cause the most confusion. Who opens the door, who receives the key at the end, and whether a separate building key, card or door code is needed should be clear from the start. Working water and electricity is a separate item; little can be done with the meters off. When booking empty flat cleaning, noting lift use, parking and any management permission in the same message speeds things up.
The eight services in brief
Home cleaning covers kitchen, bathroom and living areas. Office work covers workspaces, shared areas and toilets; electronics and documents stay outside the scope. After construction, coarse debris and fine cleaning are assessed separately. Empty flat, apartment and estate, and villa cleaning are planned by access and occupancy. For upholstery, the fabric label is checked and no stain removal is promised. Glass cleaning is limited to reachable surfaces.
Checkpoints before and after
- Before: floor types and any care instructions, busy hours, who holds the key or code, water and electricity status, items and rooms to be excluded.
- After: whether wet sections have dried, skirting and corner lines, residue in seams, where waste was left, and who received the key.
What hour suits shared-area cleaning?
The quietest window is best. You are the one who knows it, so telling us the busy hours for the entrance and stairs before the appointment lets the sequence be built around them.
Can I leave the key with a neighbour?
Yes, if the handover and return chain is agreed in writing. If it is unclear who unlocks and who locks up, booking a time you can attend yourself is safer. For scope and access, call 0537 445 01 91.