If a window still looks hazy after the inside pane has been wiped, the first explanation that comes to mind is usually the wrong one. Sometimes the issue is not the glass at all but fine dust packed into the seal between sash and frame; sometimes the outer face was simply never reachable. Anyone looking for cleaning at an address in Kuşlar, a mahalle of Serik in Antalya, will get a more accurate scope if they can make that distinction while describing the job.
How to split the work when you describe it
CGS Temizlik's work falls into eight areas: home cleaning, office and workplace cleaning, post-construction cleaning, empty flat cleaning, apartment and residential complex cleaning, villa cleaning, upholstery washing and window cleaning. Each scope is discussed according to the address, the contents and access. Cupboard interiors before a move, for instance, belong to empty flat cleaning, while in a furnished home the same task is agreed separately within home cleaning.
Where the limit of access begins on glass and frames
What decides a window job is not the type of soiling but whether the surface can be reached safely. Some windows open fully and the outer face is easy to wipe from inside; others only tilt, and then the upper part of the outer pane may stay out of reach. Fixed glass panels, the outer face of enclosed balconies and areas behind railings differ from address to address. These are conditions that can come up, not a description that applies to every home here.
So it helps to say up front: how many sashes there are, whether they open, whether any section cannot be reached from outside, and whether insect screens or shutters can be removed. Frame cleaning is separate work; aluminium, PVC and timber frames do not accept the same method, and build-up in the frame groove often takes longer than the glass itself. Window cleaning is limited to reachable surfaces, with no promise of risky façade or height work.
If you see something that looks like a scratch, testing it with a fingernail is not a reliable method. A scratch, a limescale mark, a low-emissivity coating and permanent clouding can all look alike; telling them apart requires an on-site expert assessment. If the mark is permanent, cleaning should not be expected to remove it.
In the bathroom, product choice starts with the material
Most bathroom damage happens when a product is applied before anyone knows what the surface is. Natural stone is not ceramic; a matt-finish tap is not polished chrome; shower enclosure glass is not an acrylic tray. On a coated anti-limescale surface, an abrasive pad can leave a mark that cannot be undone.
If you have the manufacturer's care instructions, or if the enclosure, countertop or tray was recently replaced, say so at the start. Where no instruction is known, the method is chosen cautiously: tested first on a small hidden area, and dropped on that surface if the result is unexpected. In grout, silicone and around tap bases, part of an old stain may be permanent, and saying this early makes the outcome clearer.
Checkpoints before and after
- Before: point out sashes that do not open and screens that cannot be removed.
- Before: name any natural stone, coated glass or matt taps in the bathroom.
- Before: confirm that water and electricity are on.
- After: look at the glass in daylight, from angles both inside and outside.
- After: check the lower frame groove, hinge areas and the base profile of the shower enclosure.
Walking the area together at the end
Walking through the space with the team at the end settles on the spot what is hard to resolve later by message. Whether a remaining mark is removable soiling or the condition of the surface itself only becomes clear when the light and viewing angle are changed. Any glass section that could not be reached is shown plainly during this walk, so nothing left out of scope stays vague.
What happens if the outer pane cannot be cleaned at all?
If access is not safe, that section is left out of scope and you are shown which sashes were not wiped. Any alternative route of access is discussed when the address is reviewed.
Will bathroom limescale come off completely?
It depends on the surface type and how old the marks are; part of it may be permanent. Aggressive methods are not used on coated surfaces.
To clarify the scope for an address in Kuşlar, you can reach CGS Temizlik on 0537 4450191. Main office: Sütçüler Mahallesi 15 Temmuz Şehitler Cd No109/D Kepez/Antalya.