Have you noticed the thin lines that appear on a window only when the light angle changes? They often say more about the condition of the surface than about the quality of the work. People looking for cleaning in Hızırkahya, part of Kumluca, usually arrive with one of two situations: a transition such as a move or renovation, or a glass and frame job that has been postponed for a long time. The preparation, and the limits worth discussing, differ in each case.
How far glass and frames can be reached
The scope of glass cleaning is set less by the glass itself than by how it can be approached. A window that opens inwards and swings fully usually allows the outer face to be worked on. Fixed panels, large non-opening panes, the upper bands of enclosed balconies, or surfaces that can only be reached from outside and at height are a different matter; risky facade work or work at height is not promised. Frames, hinge recesses, rails and gasket gaps are separate labour items and should be agreed on in advance. When describing the address, mention whether windows open, whether insect screens are fitted, and whether the floor allows working. Details are on the glass cleaning page.
A mark from washing or an older surface issue
Not every mark visible after cleaning has the same cause. Residue from water or detergent tends to spread across the whole pane and stands out as the light changes. A dullness concentrated in one spot that stays in place regardless may have nothing to do with cleaning. The key point is not to expect a firm diagnosis: whether it is a scratch, a permanent change in the surface, or the behaviour of a factory coating requires expert assessment. Home tests that try to locate a scratch by running a fingernail over the glass are unreliable and can damage the surface. The most useful step is to look at these areas together before work starts and note them, so that afterwards there is no argument about what is new and what was already there. The same applies to insulated units, mirrors, shower screens and coated surfaces: no method counts as suitable while the manufacturer's care instructions are unknown.
Booking more than one service on the same day
Glass cleaning can share a day with home cleaning or upholstery washing, but the order matters. Dust-raising work comes before glass; anything that leaves surfaces wet goes last. If upholstery has been washed, the room needs ventilation and time before other work continues. After renovation, fine glass cleaning done before the coarse waste and dust stages simply means doing it twice. In multi-storey use, the order of stairs, rooms and glass follows how the property is used; see villa cleaning and post-construction cleaning.
The eight services in brief
Home cleaning covers kitchen, bathroom and living areas; office cleaning covers work and shared areas, with limits around electronics and documents. Post-construction cleaning separates coarse waste from fine work. Empty flat cleaning includes cupboard interiors, bathroom, kitchen and floors, and needs water and power. Apartment and site cleaning covers stairs, landings and entrances; villa cleaning sets the room order and excludes pool care. Upholstery washing starts with the label and carries no stain-removal guarantee. Glass cleaning is limited to reachable surfaces.
Checklist before and after
- State which windows do not open or can only be reached from outside.
- Say separately if frames, rails and screens are included.
- Point out existing dullness, apparent scratches or coating differences beforehand.
- If a second service shares the day, agree the order and drying time.
- At the end, change the lighting and look at the same areas again.
What happens with panes that cannot be reached from outside?
They are left out of scope and stated clearly before work begins; the reachable inner face and the frame are discussed separately.
How is a complaint about dullness after washing handled?
If the area was noted beforehand, a comparison is possible. Where the surface has changed permanently, the cause is a matter for expert inspection rather than cleaning method.
To discuss scope: CGS Temizlik, Sütçüler Mahallesi 15 Temmuz Şehitler Cd No109/D Kepez/Antalya — 0537 4450191. Coverage is agreed according to the address and access conditions.